How to Light Charcoal Without Lighter Fluid (3 Easy Ways)
Skip the lighter fluid and the petroleum smell. Three simple ways to light a charcoal grill with natural fatwood — with or without a chimney.
· 2 min read
Lighter fluid works, but it brings a petroleum smell to the grill and to the people standing around it. Here are three ways to light charcoal naturally, using a few sticks of fatwood.
1. With a chimney starter (the easiest)
- Place 2–3 sticks of fatwood on the charcoal grate.
- Set the chimney starter on top of them and fill it with charcoal.
- Light the fatwood from below with one match.
- Wait 15–20 minutes, until the top coals are covered in gray ash.
- Pour the coals into the grill and start cooking.
2. Without a chimney: the pyramid
- Lay 3–4 sticks of fatwood in the center of the grate.
- Pile charcoal loosely over them in a pyramid.
- Light the fatwood at the base in a couple of spots.
- When the coals are mostly gray, spread them out.
3. The fatwood teepee (great for lump charcoal and pizza ovens)
- Stand 3–4 sticks of fatwood together in a teepee.
- Lean lump charcoal or small wood pieces around it.
- Light the fatwood inside the teepee. It catches and lights the fuel around it.
For wood-fired pizza ovens, use the same teepee to start your fire, then build it up and let it burn down to a steady bed before baking.
When can I start cooking?
Wait until the fatwood has burned down completely and your coals are covered in gray ash. That gives the best flavor and a steady, even heat.
Is fatwood safe for cooking?
Fatwood is just pine and its natural resin, with nothing added. Use it to light your charcoal, let it burn off before food goes on the grill, and never use it in a gas grill.
How much do I need?
Two to four sticks per cookout. A 5 lb bag lasts most of a grilling season; the 10 lb box covers the whole summer. More on grilling with fatwood.